Ideal solution for high-precision operation

Latest integrated drive technology for vacuum capacitors at best price-performance ratio.

Motorized capacitors are the ideal solution for high-precision operation. Besides ensuring  highest accuracy, motorized capacitors simplify procurement with an easy-to-install subsystem. The core components of Universal Integrated Drive systems are a Comet variable Vacuum Capacitor, mounted with an insulating cover, coupler and stepper-motor. A durable, backlash-free Comet-coupler connects the capacitor to the drive system.

Integrated flanges ensure easy mounting in the system. Appropriate high-voltage insulation between the capacitor and the flanges is also included.

High-level commands

Module can be controlled from a PC or a control board using high-level commands (RS232, RS485 for Universal ID). The communication protocol allows the execution of the following commands.

  • Precise motion control by setting full-step, micro-step or capacitance position
  • Set idle and drive current, speed and slave address within allowed range
  • Read out of actual full-step, micro-step and capacitance position
  • Read out of characteristic capacitance curve (C-Curve)
  • Read out of various parameters such as firmware version, serial number and all customer and factory limits
  • Comprehensive RX responses (ACK, NAK):
    – ACK for all commands
    – ACK for «movement-started» resp. «movement completed»
    – NAK e.g. check-sum error, index out of range
  • Baud rate can be set within 9.600 to 115.200 Bd
  • Set user limits (Cmin and Cmax) within factory limits
  • Store up to 10 user selectable positions

Capacitor tuning

Using a stepper-motor, the capacitance of the variable capacitor can be tuned precisely between user selectable limits.

Integrated Drive Vacuum Capacitors

Universal ID

Integrated drive solution

Features

  • One driver PCB for new Integrated Drives (ID-400 and ID-1200)

  • Same communication Comet protocol RS232 and RS485

  • Flexible baud rate between 9.600 and 115.200 Bd

  • Connect up to 32 modules in RS485 mode

  • Readout of full-step, micro-step and capacitance position

  • Capacitance table with higher resolution on request

Benefits

  • High accuracy and repeatability of capacity positioning
  • High capacitance resolution (position control) to 0.01 pF
  • Accurate alignment of variable vacuum capacitor and steppermotor and a durable, backlashfree coupling result in long, consistent lifetime
  • Easy installation
  • Low total cost of ownership
  • Efficient use of matchbox space

Technical Specifications

Capacitance Cmax range100 - 2000 pF

Upt range

3 - 25 kV

max. current IRMS at 13.56 MHz

72 - 170 ARMS

Diameter

55 - 117 mm

Height

230 - 280 mm

Cooling system

Convection

RoHS conform

Yes

Supply voltage

+24 VDC
Supply currentIp < 1.1 A (ID-400)
Ip < 2.8 A (ID-1200)
Full-step angle1.8 °

Motor speed

up to 600 rpm

Micro-stepping16 micro-steps
Operating temperature+5  –  +50 °C
Available interfacesRS232, RS485
Address range (RS485)0 x 21 – 0 x 40
Baud rate9.600 – 115.200 Bd

Applications

Two sizes of integrated drive systems are available for different capacitor series. Here our recommendations:

ID-400

e.g. Uni-Con, Uni-Select

ID-1200

e.g. Power-Con, Hexa-Con, Maxi-Con

Universal ID product range

Questions?

Contact

Talk to us

Advanced Technologies

Unbeaten features improve your performance

Discover

Service Bulletins

Product applications & technical background

All Service Bulletins